Using cabinetry that meets the OEM’s specification in color, height, and depth, FloClear® is able to become a seamless part of the infrastructure on the gear side of the press and either integrate into any dampening system upon installation of a new press, or be retrofit into any existing installation. As we progressed we found that many retrofit locations were very “space challenged”. Therefore, it was clear that we needed to “shrink the footprint” as much as possible without compromising optimum performance. The current width of our FS unit is 24 inches (600mm). The standard depth is 700mm, but upon special request, 800mm cabinetry can be accommodated. The FS Series comes in 3 different types of configurations. There is the FS Smart Model, the FS Productivity Model, and the FS Integrated Model (licensed only with AGT).
As pictured to the left, the FloClear® FS Smart Model comes with an integrated CPU and touch screen module that is integrated with the multiple transducers located at the various housings and the pump. This enables the unit to advise the operator the pressure at each particular stage as well as the pressure differentials between each stage in order to facilitate determination of when and which particular stage of cartridge needs to be changed. The LCD touch screen also monitors usage time of each filter stage, gives troubleshooting suggestions if a warning appears on the screen, monitors and alerts if pressure increases too rapidly over a certain time period, and automatically shuts down for high or low pressure problems and alerts user of what occurred and last the pressure readings before shut down.
The FS Productivity Model has the same 3 stainless steel housings and seamless stainless steel tubing, all of which is insulated to insure there is no condensation. The Productivity Model has and LCD Display to give feedback to the operator regarding various faults (if and when they occur) as well as record run times of the various filter media in each housing; the three gauges atop each housing to monitor pressures, a high/low pump protection is built into the unit so that the pump will shut down if either extreme is breached and indicate the fault on the LCD Display as well as light the beacon to alert the operator of the fault.
The FS Integrated Model is similarly equipped to the FS Smart Model with all of the functions and capabilities. However, we have licensed AGT-USA to completely integrate the system into its Combination system such that the unit is installed at the factory, integrated into the operation of the AGT unit, and utilizes the same CPU and touch screen, thereby saving the customer additional installation and material costs while offering the same optimum performance at almost the same price as the Productivity Model price.